Management API Reference for address-setting

An address setting defines some attributes that are defined against an address wildcard rather than a specific queue.

Attributes (26)

address-full-policy - Determines what happens when an address where max-size-bytes is specified becomes full. (PAGE, DROP or BLOCK)

Type	STRING
Default Value	PAGE
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Allowed Values	BLOCK PAGE FAIL DROP
Stability Level	default
Raw DMR model	`{ "type" : { "TYPE_MODEL_VALUE" : "STRING" }, "description" : "Determines what happens when an address where max-size-bytes is specified becomes full. (PAGE, DROP or BLOCK)", "expressions-allowed" : true, "required" : false, "nillable" : true, "default" : "PAGE", "allowed" : [ "DROP", "PAGE", "BLOCK", "FAIL" ], "stability" : "default", "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }`

auto-create-addresses - Determines whether ActiveMQ should automatically create an addresses corresponding to the address-settings match when a producer or a consumer is tries to use such a queue.

Type	BOOLEAN
Default Value	true
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Stability Level	default
Raw DMR model	`{ "type" : { "TYPE_MODEL_VALUE" : "BOOLEAN" }, "description" : "Determines whether ActiveMQ should automatically create an addresses corresponding to the address-settings match when a producer or a consumer is tries to use such a queue.", "expressions-allowed" : true, "required" : false, "nillable" : true, "default" : true, "stability" : "default", "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }`

auto-create-jms-queues - Determines whether ActiveMQ should automatically create a Jakarta Messaging queue corresponding to the address-settings match when a Jakarta Messaging producer or a consumer is tries to use such a queue.

Deprecated Since 3.0.0

This attribute is no longer supported by ActiveMQ.

Type	BOOLEAN
Default Value	false
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Stability Level	default
Raw DMR model	{ "type" : { "TYPE_MODEL_VALUE" : "BOOLEAN" }, "description" : "Determines whether ActiveMQ should automatically create a Jakarta Messaging queue corresponding to the address-settings match when a Jakarta Messaging producer or a consumer is tries to use such a queue.", "expressions-allowed" : true, "required" : false, "nillable" : true, "default" : false, "stability" : "default", "deprecated" : { "since" : "3.0.0", "reason" : "This attribute is no longer supported by ActiveMQ." }, "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }

auto-create-queues - Determines whether ActiveMQ should automatically create a queue corresponding to the address-settings match when a producer or a consumer is tries to use such a queue.

Type	BOOLEAN
Default Value	false
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Stability Level	default
Raw DMR model	`{ "type" : { "TYPE_MODEL_VALUE" : "BOOLEAN" }, "description" : "Determines whether ActiveMQ should automatically create a queue corresponding to the address-settings match when a producer or a consumer is tries to use such a queue.", "expressions-allowed" : true, "required" : false, "nillable" : true, "default" : false, "stability" : "default", "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }`

auto-delete-addresses - Determines whether ActiveMQ should automatically delete auto-created addresses when they have no consumers and no messages.

Type	BOOLEAN
Default Value	true
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Stability Level	default
Raw DMR model	`{ "type" : { "TYPE_MODEL_VALUE" : "BOOLEAN" }, "description" : "Determines whether ActiveMQ should automatically delete auto-created addresses when they have no consumers and no messages.", "expressions-allowed" : true, "required" : false, "nillable" : true, "default" : true, "stability" : "default", "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }`

auto-delete-created-queues - Determines whether ActiveMQ should automatically delete auto-created queues when they have no consumers and no messages.

Type	BOOLEAN
Default Value	false
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Stability Level	default
Raw DMR model	`{ "type" : { "TYPE_MODEL_VALUE" : "BOOLEAN" }, "description" : "Determines whether ActiveMQ should automatically delete auto-created queues when they have no consumers and no messages.", "expressions-allowed" : true, "required" : false, "nillable" : true, "default" : false, "stability" : "default", "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }`

auto-delete-jms-queues - Determines Whether ActiveMQ should automatically delete auto-created Jakarta Messaging queues when they have no consumers and no messages.

Deprecated Since 3.0.0

This attribute is no longer supported by ActiveMQ.

Type	BOOLEAN
Default Value	false
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Stability Level	default
Raw DMR model	{ "type" : { "TYPE_MODEL_VALUE" : "BOOLEAN" }, "description" : "Determines Whether ActiveMQ should automatically delete auto-created Jakarta Messaging queues when they have no consumers and no messages.", "expressions-allowed" : true, "required" : false, "nillable" : true, "default" : false, "stability" : "default", "deprecated" : { "since" : "3.0.0", "reason" : "This attribute is no longer supported by ActiveMQ." }, "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }

auto-delete-queues - Determines Whether ActiveMQ should automatically delete auto-created queues when they have no consumers and no messages.

Type	BOOLEAN
Default Value	false
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Stability Level	default
Raw DMR model	`{ "type" : { "TYPE_MODEL_VALUE" : "BOOLEAN" }, "description" : "Determines Whether ActiveMQ should automatically delete auto-created queues when they have no consumers and no messages.", "expressions-allowed" : true, "required" : false, "nillable" : true, "default" : false, "stability" : "default", "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }`

dead-letter-address - The dead letter address

Type	STRING
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Stability Level	default
Raw DMR model	`{ "type" : { "TYPE_MODEL_VALUE" : "STRING" }, "description" : "The dead letter address", "expressions-allowed" : true, "required" : false, "nillable" : true, "min-length" : 1, "max-length" : 2147483647, "stability" : "default", "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }`

expiry-address - Defines where to send a message that has expired.

Type	STRING
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Stability Level	default
Raw DMR model	`{ "type" : { "TYPE_MODEL_VALUE" : "STRING" }, "description" : "Defines where to send a message that has expired.", "expressions-allowed" : true, "required" : false, "nillable" : true, "min-length" : 1, "max-length" : 2147483647, "stability" : "default", "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }`

expiry-delay - Defines the expiration time that will be used for messages using the default expiration time

Type	LONG
Default Value	-1
Unit	MILLISECONDS
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Stability Level	default
Raw DMR model	`{ "type" : { "TYPE_MODEL_VALUE" : "LONG" }, "description" : "Defines the expiration time that will be used for messages using the default expiration time", "expressions-allowed" : true, "required" : false, "nillable" : true, "default" : -1, "unit" : "MILLISECONDS", "stability" : "default", "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }`

last-value-queue - Defines whether a queue only uses last values or not

Type	BOOLEAN
Default Value	false
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Stability Level	default
Raw DMR model	`{ "type" : { "TYPE_MODEL_VALUE" : "BOOLEAN" }, "description" : "Defines whether a queue only uses last values or not", "expressions-allowed" : true, "required" : false, "nillable" : true, "default" : false, "stability" : "default", "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }`

max-delivery-attempts - Defines how many time a cancelled message can be redelivered before sending to the dead-letter-address

Type	INT
Default Value	10
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Stability Level	default
Raw DMR model	`{ "type" : { "TYPE_MODEL_VALUE" : "INT" }, "description" : "Defines how many time a cancelled message can be redelivered before sending to the dead-letter-address", "expressions-allowed" : true, "required" : false, "nillable" : true, "default" : 10, "stability" : "default", "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }`

max-read-page-bytes - How much memory the messages read from paging can take on the Queue whenever more messages are needed.

Type	INT
Default Value	20971520
Unit	BYTES
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Stability Level	default
Raw DMR model	`{ "type" : { "TYPE_MODEL_VALUE" : "INT" }, "description" : "How much memory the messages read from paging can take on the Queue whenever more messages are needed.", "expressions-allowed" : true, "required" : false, "nillable" : true, "default" : 20971520, "unit" : "BYTES", "stability" : "default", "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }`

max-redelivery-delay - Maximum value for the redelivery-delay (in ms).

Type	LONG
Default Value	0
Unit	MILLISECONDS
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Stability Level	default
Raw DMR model	`{ "type" : { "TYPE_MODEL_VALUE" : "LONG" }, "description" : "Maximum value for the redelivery-delay (in ms).", "expressions-allowed" : true, "required" : false, "nillable" : true, "default" : 0, "unit" : "MILLISECONDS", "stability" : "default", "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }`

max-size-bytes - The max bytes size.

Type	LONG
Default Value	-1
Unit	BYTES
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Stability Level	default
Raw DMR model	`{ "type" : { "TYPE_MODEL_VALUE" : "LONG" }, "description" : "The max bytes size.", "expressions-allowed" : true, "required" : false, "nillable" : true, "default" : -1, "unit" : "BYTES", "stability" : "default", "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }`

message-counter-history-day-limit - Day limit for the message counter history.

Type	INT
Default Value	0
Unit	DAYS
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Stability Level	default
Raw DMR model	`{ "type" : { "TYPE_MODEL_VALUE" : "INT" }, "description" : "Day limit for the message counter history.", "expressions-allowed" : true, "required" : false, "nillable" : true, "default" : 0, "unit" : "DAYS", "stability" : "default", "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }`

page-max-cache-size - The number of page files to keep in memory to optimize IO during paging navigation.

Type	INT
Default Value	5
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Stability Level	default
Raw DMR model	`{ "type" : { "TYPE_MODEL_VALUE" : "INT" }, "description" : "The number of page files to keep in memory to optimize IO during paging navigation.", "expressions-allowed" : true, "required" : false, "nillable" : true, "default" : 5, "stability" : "default", "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }`

page-size-bytes - The paging size.

Type	INT
Default Value	10485760
Unit	BYTES
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Stability Level	default
Raw DMR model	`{ "type" : { "TYPE_MODEL_VALUE" : "INT" }, "description" : "The paging size.", "expressions-allowed" : true, "required" : false, "nillable" : true, "default" : 10485760, "unit" : "BYTES", "stability" : "default", "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }`

redelivery-delay - Defines how long to wait before attempting redelivery of a cancelled message

Type	LONG
Default Value	0
Unit	MILLISECONDS
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Stability Level	default
Raw DMR model	`{ "type" : { "TYPE_MODEL_VALUE" : "LONG" }, "description" : "Defines how long to wait before attempting redelivery of a cancelled message", "expressions-allowed" : true, "required" : false, "nillable" : true, "default" : 0, "unit" : "MILLISECONDS", "stability" : "default", "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }`

redelivery-multiplier - Multiplier to apply to the redelivery-delay parameter

Type	DOUBLE
Default Value	1.0
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Stability Level	default
Raw DMR model	`{ "type" : { "TYPE_MODEL_VALUE" : "DOUBLE" }, "description" : "Multiplier to apply to the redelivery-delay parameter", "expressions-allowed" : true, "required" : false, "nillable" : true, "default" : 1.0, "stability" : "default", "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }`

redistribution-delay - Defines how long to wait when the last consumer is closed on a queue before redistributing any messages

Type	LONG
Default Value	-1
Unit	MILLISECONDS
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Stability Level	default
Raw DMR model	`{ "type" : { "TYPE_MODEL_VALUE" : "LONG" }, "description" : "Defines how long to wait when the last consumer is closed on a queue before redistributing any messages", "expressions-allowed" : true, "required" : false, "nillable" : true, "default" : -1, "unit" : "MILLISECONDS", "stability" : "default", "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }`

send-to-dla-on-no-route - If this parameter is set to true for that address, if the message is not routed to any queues it will instead be sent to the dead letter address (DLA) for that address, if it exists.

Type	BOOLEAN
Default Value	false
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Stability Level	default
Raw DMR model	`{ "type" : { "TYPE_MODEL_VALUE" : "BOOLEAN" }, "description" : "If this parameter is set to true for that address, if the message is not routed to any queues it will instead be sent to the dead letter address (DLA) for that address, if it exists.", "expressions-allowed" : true, "required" : false, "nillable" : true, "default" : false, "stability" : "default", "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }`

slow-consumer-check-period - How often to check for slow consumers on a particular queue.

Type	LONG
Default Value	5
Unit	SECONDS
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Stability Level	default
Raw DMR model	`{ "type" : { "TYPE_MODEL_VALUE" : "LONG" }, "description" : "How often to check for slow consumers on a particular queue.", "expressions-allowed" : true, "required" : false, "nillable" : true, "default" : 5, "unit" : "SECONDS", "stability" : "default", "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }`

slow-consumer-policy - Determine what happens when a slow consumer is identified.

Type	STRING
Default Value	NOTIFY
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Allowed Values	NOTIFY KILL
Stability Level	default
Raw DMR model	`{ "type" : { "TYPE_MODEL_VALUE" : "STRING" }, "description" : "Determine what happens when a slow consumer is identified.", "expressions-allowed" : true, "required" : false, "nillable" : true, "default" : "NOTIFY", "allowed" : [ "KILL", "NOTIFY" ], "stability" : "default", "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }`

slow-consumer-threshold - The minimum rate of message consumption allowed before a consumer is considered slow.

Type	LONG
Default Value	-1
Is the attribute nillable?	true
Does the attribute allow expression?	true
Where is the attribute stored?	configuration
Access Type	read-write
Is restarted required?	no-services
Stability Level	default
Raw DMR model	`{ "type" : { "TYPE_MODEL_VALUE" : "LONG" }, "description" : "The minimum rate of message consumption allowed before a consumer is considered slow.", "expressions-allowed" : true, "required" : false, "nillable" : true, "default" : -1, "stability" : "default", "access-type" : "read-write", "storage" : "configuration", "restart-required" : "no-services", "capability-reference" : null }`

Operations (2)

add - Operation adding an address-setting

Request Parameter	Type	Required	Expressions Allowed	Default value	Description
address-full-policy	STRING	false	true	PAGE	Determines what happens when an address where max-size-bytes is specified becomes full. (PAGE, DROP or BLOCK)
auto-create-addresses	BOOLEAN	false	true	true	Determines whether ActiveMQ should automatically create an addresses corresponding to the address-settings match when a producer or a consumer is tries to use such a queue.
auto-create-jms-queues	BOOLEAN	false	true	false	Determines whether ActiveMQ should automatically create a Jakarta Messaging queue corresponding to the address-settings match when a Jakarta Messaging producer or a consumer is tries to use such a queue.
auto-create-queues	BOOLEAN	false	true	false	Determines whether ActiveMQ should automatically create a queue corresponding to the address-settings match when a producer or a consumer is tries to use such a queue.
auto-delete-addresses	BOOLEAN	false	true	true	Determines whether ActiveMQ should automatically delete auto-created addresses when they have no consumers and no messages.
auto-delete-created-queues	BOOLEAN	false	true	false	Determines whether ActiveMQ should automatically delete auto-created queues when they have no consumers and no messages.
auto-delete-jms-queues	BOOLEAN	false	true	false	Determines Whether ActiveMQ should automatically delete auto-created Jakarta Messaging queues when they have no consumers and no messages.
auto-delete-queues	BOOLEAN	false	true	false	Determines Whether ActiveMQ should automatically delete auto-created queues when they have no consumers and no messages.
dead-letter-address	STRING	false	true		The dead letter address
expiry-address	STRING	false	true		Defines where to send a message that has expired.
expiry-delay	LONG	false	true	-1	Defines the expiration time that will be used for messages using the default expiration time
last-value-queue	BOOLEAN	false	true	false	Defines whether a queue only uses last values or not
max-delivery-attempts	INT	false	true	10	Defines how many time a cancelled message can be redelivered before sending to the dead-letter-address
max-read-page-bytes	INT	false	true	20971520	How much memory the messages read from paging can take on the Queue whenever more messages are needed.
max-redelivery-delay	LONG	false	true	0	Maximum value for the redelivery-delay (in ms).
max-size-bytes	LONG	false	true	-1	The max bytes size.
message-counter-history-day-limit	INT	false	true	0	Day limit for the message counter history.
page-max-cache-size	INT	false	true	5	The number of page files to keep in memory to optimize IO during paging navigation.
page-size-bytes	INT	false	true	10485760	The paging size.
redelivery-delay	LONG	false	true	0	Defines how long to wait before attempting redelivery of a cancelled message
redelivery-multiplier	DOUBLE	false	true	1.0	Multiplier to apply to the redelivery-delay parameter
redistribution-delay	LONG	false	true	-1	Defines how long to wait when the last consumer is closed on a queue before redistributing any messages
send-to-dla-on-no-route	BOOLEAN	false	true	false	If this parameter is set to true for that address, if the message is not routed to any queues it will instead be sent to the dead letter address (DLA) for that address, if it exists.
slow-consumer-check-period	LONG	false	true	5	How often to check for slow consumers on a particular queue.
slow-consumer-policy	STRING	false	true	NOTIFY	Determine what happens when a slow consumer is identified.
slow-consumer-threshold	LONG	false	true	-1	The minimum rate of message consumption allowed before a consumer is considered slow.

Raw DMR model


{
    "operation-name" : "add",
    "description" : "Operation adding an address-setting",
    "request-properties" : {
        "address-full-policy" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "STRING"
            },
            "description" : "Determines what happens when an address where max-size-bytes is specified becomes full. (PAGE, DROP or BLOCK)",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "default" : "PAGE",
            "allowed" : [
                "DROP",
                "PAGE",
                "BLOCK",
                "FAIL"
            ],
            "stability" : "default"
        },
        "auto-create-addresses" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "BOOLEAN"
            },
            "description" : "Determines whether ActiveMQ should automatically create an addresses corresponding to the address-settings match when a producer or a consumer is tries to use such a queue.",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "default" : true,
            "stability" : "default"
        },
        "auto-create-jms-queues" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "BOOLEAN"
            },
            "description" : "Determines whether ActiveMQ should automatically create a Jakarta Messaging queue corresponding to the address-settings match when a Jakarta Messaging producer or a consumer is tries to use such a queue.",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "default" : false,
            "stability" : "default",
            "deprecated" : {
                "since" : "3.0.0",
                "reason" : "This attribute is no longer supported by ActiveMQ."
            }
        },
        "auto-create-queues" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "BOOLEAN"
            },
            "description" : "Determines whether ActiveMQ should automatically create a queue corresponding to the address-settings match when a producer or a consumer is tries to use such a queue.",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "default" : false,
            "stability" : "default"
        },
        "auto-delete-addresses" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "BOOLEAN"
            },
            "description" : "Determines whether ActiveMQ should automatically delete auto-created addresses when they have no consumers and no messages.",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "default" : true,
            "stability" : "default"
        },
        "auto-delete-created-queues" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "BOOLEAN"
            },
            "description" : "Determines whether ActiveMQ should automatically delete auto-created queues when they have no consumers and no messages.",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "default" : false,
            "stability" : "default"
        },
        "auto-delete-jms-queues" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "BOOLEAN"
            },
            "description" : "Determines Whether ActiveMQ should automatically delete auto-created Jakarta Messaging queues when they have no consumers and no messages.",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "default" : false,
            "stability" : "default",
            "deprecated" : {
                "since" : "3.0.0",
                "reason" : "This attribute is no longer supported by ActiveMQ."
            }
        },
        "auto-delete-queues" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "BOOLEAN"
            },
            "description" : "Determines Whether ActiveMQ should automatically delete auto-created queues when they have no consumers and no messages.",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "default" : false,
            "stability" : "default"
        },
        "dead-letter-address" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "STRING"
            },
            "description" : "The dead letter address",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "min-length" : 1,
            "max-length" : 2147483647,
            "stability" : "default"
        },
        "expiry-address" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "STRING"
            },
            "description" : "Defines where to send a message that has expired.",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "min-length" : 1,
            "max-length" : 2147483647,
            "stability" : "default"
        },
        "expiry-delay" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "LONG"
            },
            "description" : "Defines the expiration time that will be used for messages using the default expiration time",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "default" : -1,
            "unit" : "MILLISECONDS",
            "stability" : "default"
        },
        "last-value-queue" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "BOOLEAN"
            },
            "description" : "Defines whether a queue only uses last values or not",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "default" : false,
            "stability" : "default"
        },
        "max-delivery-attempts" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "INT"
            },
            "description" : "Defines how many time a cancelled message can be redelivered before sending to the dead-letter-address",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "default" : 10,
            "stability" : "default"
        },
        "max-read-page-bytes" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "INT"
            },
            "description" : "How much memory the messages read from paging can take on the Queue whenever more messages are needed.",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "default" : 20971520,
            "unit" : "BYTES",
            "stability" : "default"
        },
        "max-redelivery-delay" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "LONG"
            },
            "description" : "Maximum value for the redelivery-delay (in ms).",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "default" : 0,
            "unit" : "MILLISECONDS",
            "stability" : "default"
        },
        "max-size-bytes" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "LONG"
            },
            "description" : "The max bytes size.",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "default" : -1,
            "unit" : "BYTES",
            "stability" : "default"
        },
        "message-counter-history-day-limit" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "INT"
            },
            "description" : "Day limit for the message counter history.",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "default" : 0,
            "unit" : "DAYS",
            "stability" : "default"
        },
        "page-max-cache-size" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "INT"
            },
            "description" : "The number of page files to keep in memory to optimize IO during paging navigation.",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "default" : 5,
            "stability" : "default"
        },
        "page-size-bytes" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "INT"
            },
            "description" : "The paging size.",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "default" : 10485760,
            "unit" : "BYTES",
            "stability" : "default"
        },
        "redelivery-delay" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "LONG"
            },
            "description" : "Defines how long to wait before attempting redelivery of a cancelled message",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "default" : 0,
            "unit" : "MILLISECONDS",
            "stability" : "default"
        },
        "redelivery-multiplier" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "DOUBLE"
            },
            "description" : "Multiplier to apply to the redelivery-delay parameter",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "default" : 1.0,
            "stability" : "default"
        },
        "redistribution-delay" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "LONG"
            },
            "description" : "Defines how long to wait when the last consumer is closed on a queue before redistributing any messages",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "default" : -1,
            "unit" : "MILLISECONDS",
            "stability" : "default"
        },
        "send-to-dla-on-no-route" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "BOOLEAN"
            },
            "description" : "If this parameter is set to true for that address, if the message is not routed to any queues it will instead be sent to the dead letter address (DLA) for that address, if it exists.",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "default" : false,
            "stability" : "default"
        },
        "slow-consumer-check-period" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "LONG"
            },
            "description" : "How often to check for slow consumers on a particular queue.",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "default" : 5,
            "unit" : "SECONDS",
            "stability" : "default"
        },
        "slow-consumer-policy" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "STRING"
            },
            "description" : "Determine what happens when a slow consumer is identified.",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "default" : "NOTIFY",
            "allowed" : [
                "KILL",
                "NOTIFY"
            ],
            "stability" : "default"
        },
        "slow-consumer-threshold" : {
            "type" : {
                "TYPE_MODEL_VALUE" : "LONG"
            },
            "description" : "The minimum rate of message consumption allowed before a consumer is considered slow.",
            "expressions-allowed" : true,
            "required" : false,
            "nillable" : true,
            "default" : -1,
            "stability" : "default"
        }
    },
    "reply-properties" : {},
    "stability" : "default",
    "read-only" : false,
    "runtime-only" : false
}

remove - Operation removing an existing address-setting

Raw DMR model


{
    "operation-name" : "remove",
    "description" : "Operation removing an existing address-setting",
    "request-properties" : {},
    "reply-properties" : {},
    "stability" : "default",
    "read-only" : false,
    "restart-required" : "resource-services",
    "runtime-only" : false
}

Galleon Features

Galleon features are to be used when creating Galleon feature-packs.

subsystem.messaging-activemq.server.address-setting

        
<feature spec="subsystem.messaging-activemq.server.address-setting">
  <param name="address-setting" value="{resource name}"/>
  <param name="server" value="{resource name}"/>
  <param name="address-full-policy" value="{value}"/>
  <param name="auto-create-addresses" value="{value}"/>
  <param name="auto-create-jms-queues" value="{value}"/>
  <param name="auto-create-queues" value="{value}"/>
  <param name="auto-delete-addresses" value="{value}"/>
  <param name="auto-delete-created-queues" value="{value}"/>
  <param name="auto-delete-jms-queues" value="{value}"/>
  <param name="auto-delete-queues" value="{value}"/>
  <param name="dead-letter-address" value="{value}"/>
  <param name="expiry-address" value="{value}"/>
  <param name="expiry-delay" value="{value}"/>
  <param name="last-value-queue" value="{value}"/>
  <param name="max-delivery-attempts" value="{value}"/>
  <param name="max-read-page-bytes" value="{value}"/>
  <param name="max-redelivery-delay" value="{value}"/>
  <param name="max-size-bytes" value="{value}"/>
  <param name="message-counter-history-day-limit" value="{value}"/>
  <param name="page-max-cache-size" value="{value}"/>
  <param name="page-size-bytes" value="{value}"/>
  <param name="redelivery-delay" value="{value}"/>
  <param name="redelivery-multiplier" value="{value}"/>
  <param name="redistribution-delay" value="{value}"/>
  <param name="send-to-dla-on-no-route" value="{value}"/>
  <param name="slow-consumer-check-period" value="{value}"/>
  <param name="slow-consumer-policy" value="{value}"/>
  <param name="slow-consumer-threshold" value="{value}"/>
<feature/>